Benefits of Better Water
Residential Services
Water Testing
Water Conditioners/Softeners
Water Filters
Disinfection Systems
Problem Water
Chemical Contamination
 
“Thank you folks, for the wonderful service and your outstanding products. We have been blessed.”
– Charlene Cortese
Rhinebeck, NY
“I wish I had found your company 17 years ago… Thank you for your professionalism and expertise.”
– Gerald Kline
Middletown, NY
“You guys are the greatest and you run one of the finest companies I’ve ever dealt with… Your service, your system and your people are absolutely the finest.”
– Pat Farley
 
Water Problems

Common Drinking Water Issues

drinking water problemsThe following is a summary of the most common problems in residential water and is based upon a wide accumulation of information from both field and laboratory findings:

Hardness - Hardwater contains a high amount of calcium and magnesium as well as other minerals. Problems caused by hard water include the reduction of cleaning strength of soaps and detergents and the build up of scale in hot water heaters, boilers and hot water pipes. thereby shortening appliance life.

Iron - Iron is a common water contaminant which can cause stains on porcelain fixtures and laundry in concentrations as low as .3 mg/l as well as producing an off taste in beverages. In its insoluble forms, iron can form sludge deposits in pressure tanks, pipe lines, water heaters, an dother plumbing appliances and fixtures.

Manganese - Manganese causes a bitter taste in water and can cause brown-black stains on laundry and plumbing fixtures especially when mixed with chlorine.

Acidity (pH) - A pH scale of 0-14 is used to indicate the varying degrees of acidity, with 7 being neutral. Anything below 7 is acidic, so the lower the pH, the higher the acidity. Left untreated, acidic water will corroded copper pipes, metal fixtures and pipes under sinks adding the corroded material to drinking water. Blue green stains usually indicate acidic water.

Total Dissolved Solids - As the name implies, TDS is a measure of all solids dissolved in a samples. This is, however, also an indirect measure of the mineral level. The higher the TDS, the higher the mineral level.

Sulfur (Hydrogen Sulfide) - To obtain accurate levels of sulfur this compound must be tested on site as it is a gas and will dissipate after the water is drawn from the faucet. There is, however, a characteristic "rotten egg" odor. Sulfur can promote corrosion, tarnish silver and while high concentrations are rare, can be flammable and poisonous. Sulfur gas results from the anaerobic decomposition of organic matter.

Colloidal Clay - Colloidal clay consists of very fine solid particles suspended in water. These particles are so light in weight that they will not settle even after standing for an indefinite period. Coagulation of these particles is necessary and then filtration.

Chlorine - Chlorine is added to water by municipalities and other public water systems to kill bacteria. Carbon is a simple and inexpensive way to eliminate the taste, odor and health risks associated with chlorinated drinking water.

Methane - Methane or marsh gas, is a colorless, odorless and highly flammable gas. While not a health threat, methane can be ignited when escapes from the water. Signs of methane include rattling pipes, sputtering at the faucets and a milky look to the water.

Bacteria - Bacteria and other microbes are the oldest and most dangerous contaminants in drinking water. Water contaminated with bacteria may be an indication that human or animal wastes have entered the water supply, however, contamination may be due to any number of factors. Harmful bacteria are generally called pathogens. Pathogens can cause a variety of health problems including intestinal problems, weight loss, chronic fatigue and sometimes more serious illnesses. Children are often more vulnerable. Frequent testing for potability is recommended.


Case Study: Tackling the East's Highest Sulfur Tainted Well
A homeowner in rural High Falls, NY was plagued with unusually high levels of sulfur in her water. It destroyed appliances, rendered food inedible, and even make house guests sick. As proof of Hudson's deep commitment to solving water problems - a well researched ozone solution was developed and applied, making the sulfur challenge a thing of the past.

You can read the complete article here.


The Sand Trap
The Sand Trap is a unique way to separate and settle out sand,
shale and oxidized organics found in some water supplies. We
are able to do this by running the water through an internal swirl
chamber then into a diverting plate. This will allow the heavier
particles to settle to the bottom of the tank for blow down. This is just one of many solutions to various water problems.

Features of the system:

  • No moving parts
  • No backwashing needed
  • No electric required
  • No filter cartridges to clean or replace
  • High flow rate 24 G.P.M.
  • 1" in & out
  • 5 year warranty on tank and head assembly